3D printing tips (For Hardware kit):

Recommended software to view the model: k-studio(STL Preview Thumbnails in Windows)
https://www.jspb3d.com/events/optimize-your-production-process

Machine setting: Layer height 0.2~0.25 / Nose 0.4 0.5 0.6 
Material used: PLA / PLA+(PLA2.0)
Increase the success rate: It is recommended to use glue for the platform,
These objects must turn on the Brim: nj_rasen+brim_.stl & nj_main_grip+brim_30_infill.stl
Note: The tightness of the "rasen chamber" will affect the shooting range.
We provide you with two models : nj_rasen+brim_ &nj_rusem+brim_prusa_tight_fit, one is normal and the other is tighter.


About the malfunction:

1. Can't fire when trigger is pressed.
When assembling the trigger, the trigger must be able to slide and release easily.
Adjust the upper screw of the trigger to achieve a smooth operation after 2~6 uses.
Be careful when operating the trigger, it may catch on your hand.

2.The impact caused the fire.
This occurs when the trigger spring is not strong enough and the piston rod is angled out of place,
You can take the trigger spring out, extend the spring and put it back in, it's a complicated process, we're changing the model to make it easier to take apart.

A better seal:
We offer a Perfectcut.stl that will help you cut the cork more efficiently.
We are testing different materials on the cork and some of them work well!

perfectcut.stl
File Size:	90 kb
File Type:	stl

Download File

---

Some reports:
The spiral chamber has improved accuracy so much that the next time we release a cyberninja it will no longer give you a scar barrel, which is too complicated to make, we're developing a new accessory, and it's a blaster stock.