PRODUCT DESCRIPTION
|
Name: JSPB-Build & Battle-Mini hopper
[3D Printed DIY-KIT] 噴射管槍-3D列印技術DIY快速組合套件-迷你彈斗 
快速組裝,威力強大,流暢的彈斗設計,自動給彈,沒有卡彈的疑慮,先進的漩渦技術,擊發同時可以讓子彈旋轉.
3D printed blaster Firing :3 Mode of fire:Single-fire Number of pumps: 4 FPS: 90~100 |
SMALL IN SIZE,BIG ON POWER!
小巧的尺寸,強大的威力,而這樣子的威力歸功於槓桿機構的設計,此外,可調式扳機設計,調整為您最舒適的距離!
Adjustable trigger design, adjusted for your most comfortable distance!
Adjustable trigger design, adjusted for your most comfortable distance!
BUILT IN 30 MINUTESB&B最大的特色在於快速的建造! 相當容易,只要30分鐘即可完成!
B & B biggest feature is the quick assembly! as long as 30 minutes to complete! *Use super glue and Power tool. 
|
GRAVITY FEEDEING CLIP SYSTEM
|
Spiral AIR FLOW
漩渦氣流設計,不須加膛線即可發射旋轉的子彈.
Spiral air flow design,so that in the absence of rifle barrels of the case still let the darts spin!
Spiral air flow design,so that in the absence of rifle barrels of the case still let the darts spin!
OVER PRESSURE VALVE
|
●Safe explosion-proof over pressure valve design!
You can freely adjust to your desired power! If you are in a game where there is a speed limit, you can adjust the air pressure. The fire rate ranges from 90fps to 110fps. |
Modularization
模組化的設計,組合成你所喜好的風格!
LONG BARReL |
STOCK |
|
長槍管,六條膛線讓泡棉子彈旋轉增加準確度
|
讓射擊者可以更輕鬆的瞄準,
包覆泡棉的延伸管提供臉部貼靠時的舒適. 
|
HYPER-V
|
利用簡易鏡面反射原理,跨越彈斗所遮住的視線.
適用於Hopper clip 設計的槍款,對應SCH40的管子,並可調節30度35度以及45度 HYPER-V applicable to Hopper clip designed blaster, corresponding to the SCH40 1/2"pipes, and can adjust 30 degrees 35 degrees and 45 degrees. 
|
JSPB-Build&Battle Mini hopper
$54.00 - $65.00
Out of stock
1. Easy to build. (You can also choose Pre-assembled)
2. Small in size,big on power!
3. Gravity fedeing clip system.
4. Swirling air flow.
5. Non Jamming.
- Requires super glue,screwdriver (not included).
- Recommended for ages 12 years and up.
- Include 3D Printed blaster,Pipes,screw
- Usually Ships in 4 to 5 Weeks
JSPB-Build&Battle Long barrel
$42.00
$37.00
Only a few left!
1.長槍管為大尺寸列印件全長 39cm
2.使用六條釣魚線組成膛線槍管
3.提升射程以及準確度
- DIY-KIT
- Recommended for ages 12 years and up.
- Include: 3D Printed barrel , Screw , Fishing line
- Usually Ships in 4 to 5 Weeks
JSPB-Build&Battle Hyper-V
$48.00
$39.00
Out of stock
利用簡易鏡面反射原理,跨越彈斗所遮住的視線.
適用於Hopper clip 設計的槍款,對應SCH40的管子,並可調節30度35度以及45度.
- DIY-KIT
- **Require JSPB B&B mini hopper and B&B Shoulder stock
- Recommended for ages 12 years and up.
- include: 3D Printed object , mirror x 4 , screw
- Usually Ships in 4 to 5 Weeks
JSPB-Build&Battle Shoulder Stock
$33.00
$26.00
Out of stock
JSPB-Build&Battle Stock
Foam color: Black
- DIY-KIT
- Recommended for ages 12 years and up.
- 3D Printed stock
- Usually Ships in 4 to 5 Weeks
GALLERY
manual
| bnb_mini_hopper_manual.pdf |
WARRANTY & SUPPORTThis product is homemade and comes with a six-month warranty. If there are any faults with the product, you can exchange it for a new one.
The actual object should be considered as final. 1.本產品需自行組裝. 2.本產品為Homemade產品,享有半年保固,如有零件損壞可免費換新. 3.產品以實物為主. |
SHIPPINGShipping costs, including handling costs, will be calculated according to the product’s weight. We will fill in the delivery order, marking it as “gift”. For products that exceed US$100, the product’s value will be written as US$99. This can reduce or waiver any tax needed to pay.
運費包含處理費,結算的時候系統會依重量進行計算,我們會在寄貨單上填寫gift,超過10OUSD的產品,貨運單價值會填寫99USD,可減少或免除你需要繳交的稅金. |
