Included:
|
1. STL File:
tooth_0808_100infill xlbase xl_extened xl_ruler_arm xl_ruler_ring 2.Manual 15 pages |
*Maximum size of the object:
X 72mm Y 69mm Z 28mm *You need to prepare the abs stick and other parts, please refer to the list below |
FEATURE
BALLOON LOADING TIME ONLY 3 SECOND.
DESIGNED FOR CQB , MORE STABLE.
BALLOON RULER MAKE MORE ACCURATE.
EASY TO STORAGE
PRODUCT COMPARISONS
PARTS LIST
|
Red Latex Balloon X 16
Blue Latex Balloon X 16 Frame component X 8 3D Printed Base X 2 3D Printed Extended block X 2 3D Printed Latch X 2 3D Printed balloon ruler arm X 2 3D Printed balloon handle X 1 End cap X 6 |
ABS Stick(s) X 4
ABS Stick(190mm) X 8 ABS Stick195mm) X 12 Velcro band X 4 Balloons rod X 4 Cool sticker X 1 Number sticker X 1 Manual X 1 |
WARINIG!
|
* Frames will disassemble when oppressed or will be broken if crushed too hard.
*Please keep the life frame away from kids for the pins on it. *DO NOT hit the life frame with bare hand. *“something” can be swallowed, please keep them away from kids. *This product is designed to pop the balloons which can cause high volume noise. Please wear earplug if the sound hurts your ears. *Make sure your playground won’t bother other people by the noise.. |
*This product can only be used in JSPB games, please don’t use in any other scenario.
*Please fill the balloons with a pumper, or wear protection if pumping with your mouth. *Please DO NOT use anything else to pump the balloons such as hair dryers. *DO NOT pump the balloons with flammable gas, liquid, solid, or powder. *Balloons are consumables and there will be 2% to 5% breakage rate. |
